Table of Contents
Advertisement
can configure the IP address for Access Control List (ACL). If ACL is enabled, only
the effective IP address in the ACL can access the router.
Note:
If you select Enable in ACL capability, ensure that your host IP address is in
ACL list before it takes effect.
The following table describes the parameters and buttons of this page:
Field
Direction Select
LAN ACL Switch
IP Address
Select the router interface. You can select LAN or
WAN. In this example, LAN is selected.
Select it to enable or disable ACL function.
Enter the IP address of the specified interface. Only
the IP address that is in the same network segment
with the IP address of the specified interface can
- 76 -
Description
- Quick Links:
- Access the Router
Hide quick links:
Advertisement
Table of Contents
