Logout; Diagnostic; Ping - SONIQ CWR300ND-AU Instruction Manual

The following table describes the parameters of this page:
Field
System Time
NTP Configuration
State
Primary Server
Secondary Server
Time Zone

3.7.6 Logout

Choose Admin > Logout, the page shown in the following figure appears. You can
click the link to log out and you will be redirected to the login page.

3.8 Diagnostic

In the navigation bar, click Diagnostic. The Diagnostic page that is displayed
contains Ping, ATM Loopback, ADSL and Diagnostic Test.

3.8.1 Ping

Choose Diagnostic > Ping. The page shown in the following figure appears.
Set the system time manually.
Select enable or disable NTP function. You need
to enable NTP if you want to configure the
parameters of NTP.
Set the primary NTP server manually.
Set the secondary NTP server manually.
Choose the time zone in which area you are from
the drop down list.
- 95 -
Description