SONIQ CWR300ND-AU Instruction Manual page 63

Field
Set DNS
Manually
Apply Changes
Reset
3.5.1.2 DDNS
Click DDNS in the left pane, the page shown in the following figure appears. This
page is used to configure the dynamic DNS address from DynDNS.org or TZO.
You can add or remove to configure dynamic DNS.
enabled PVC(s) during the connection establishment.
Select it, enter the IP addresses of the primary and
secondary DNS server.
Click it to save the settings of this page.
Click it to start configuring the paremters in this page.
- 61 -
Description