SONIQ CWR300ND-AU Instruction Manual page 18

The following table describes the parameters of this page:
Field
WLAN
Interface
Band
SSID
Encryption
You can choose Enable or Disable. By default, WAN
interface is enabled.
You need to enable WAN interface, and then you can
set the parameters in this page.
Choose the working mode of the router. You can choose
24 GHz(B), 24 GHz(G), 24 GHz(B+G), 24 GHz(N), 24
GHz(G+N) or 24 GHz(B+G+N).
The service set identification (SSID) is a unique name to
identify the router in the wireless LAN. Wireless stations
associating to the router must have the same SSID.
Enter a descriptive name that is used when the wireless
client connecting to the router.
Configure the wireless encryption mode. You can
choose None, WEP, WPA (TKIP), WPA (AES), WPA2
(AES), WPA2 (TKIP) or WPA2 Mixed.
 Wired equivalent privacy (WEP) encrypts data
Description
- 16 -