Wizard - SONIQ CWR300ND-AU Instruction Manual

300m adsl2+wireless router
Table of Contents

Advertisement

When you log in as a common user, you can check the status of the router, but can
not configure the most of the settings.
Note:
In the Web configuration page, you can click Apply Changes to save the
settings temporarily. If you want to save the settings of this page permanently,
click Save of Attention that appears at the bottom of the Web page after the
configuration.

3.2 Wizard

When subscribing to a broadband service, you should be aware of the method by
which you are connected to the Internet. Your physical WAN device can be either
PPP, ADSL, or both. The technical information about the properties of your Internet
connection is provided by your Internet Service Provider (ISP). For example, your
ISP should inform you whether you are connected to the Internet using a static or
dynamic IP address, and the protocol that you use to communicate on the Internet.
The Wizard page guides fast and accurate configuration of the Internet connection
and other important parameters. The following sections describe these various
configuration parameters. Whether you configure these parameters or use the
default ones, click NEXT to enable your Internet connection.
- 12 -

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for SONIQ CWR300ND-AU

Table of Contents