Advanced Setting - SONIQ CWR300ND-AU Instruction Manual

The following describes the parameters of this page:
Field
Enable
VAP0/1/2/3
SSID
Broadcast SSID
Relay Blocking
Authentication
Type

3.4.3.5 Advanced Setting

Choose Wireless > Advanced Setting and the following page appears. In this
page, you can configure the wireless advanced parameters. It is recommended to
use the default parameters.
Note:
The parameters in the Advanced Settings are modified by the professional
personnel, it is recommended to keep the default values.
Tick to enable VAP0 /1/2/3, or untick the check box
to disable it.
Set a wireless SSID of VAP0 /1/2/3.
Choose to enable or disable VAP0 /1/2/3 SSID
broadcast.
Choose to enable or disable access blocking
between two wireless points.
Set the authentication type of VAP0 /1/2/3.
- 56 -
Description