SONIQ CWR300ND-AU Instruction Manual page 52

Field
Channel Number
Radio Power
Show Active Clients
Apply Changes
3.4.3.2 Security
Choose Wireless > Security and the following page appears.
the modem.
A channel is the radio frequency used by
802.11b/g/n wireless devices. There are 13
channels (from 1 to 13) available depending on
the geographical area. You may have a choice of
channels (for your region) and you should use a
different channel from an adjacent AP to reduce
the interference. Interference and degrading
performance occurs when radio signal from
different APs overlap.
Choose a channel from the drop-down list box.
You can choose the transmission power of the
radio signal. The default one is 100%. It is
recommended to choose the default value100%.
Click it to view the information of the wireless
clients that are connected to the modem.
Click it to apply the settings temporarily. If you
want to save the settings of this page
permanently, click Save in the lower left corner.
- 50 -
Description