SONIQ CWR300ND-AU Instruction Manual page 46

Field
Type
Local IP Address
Netmask
Unnumbered
Add
Modify
Current ATM VC Table
Click in the PPPoE mode, the page shown in the following figure appears. In
this page, you can configure parameters of this PPPoE PVC.
Description
You can choose Fixed IP or DHCP.
 If select Fixed IP, you should enter the
local IP address, remote IP address and
subnet mask.
 If select DHCP, the router is a DHCP
client, the WAN IP address is assigned
by the remote DHCP server.
Enter the IP address of WAN interface
provided by your ISP.
Enter the subnet mask of the local IP
address.
Select this checkbox
unnumbered function.
After configuring the parameters of this page,
click it to add a new PVC into the Current
ATM VC Table.
Select a PVC in the Current ATM VC Table,
then modify the parameters of this PVC. After
finishing, click it to apply the settings of this
PVC.
This table shows the existed PVCs. It shows
the interface name, channel mode, VPI/VCI,
encapsulation mode,
remote IP address and other information. The
maximum item of this table is eight.
- 44 -
to enable
local IP address,
IP