Confirming That A Drive Is Not Damaged (Drive Check) - Roland VS-1680 Owner's Manual

Chapter 11 Other Convenient Functions
Confirming That a Drive is
Not Damaged (Drive Check)
You can check the drive you are using to
make sure it can be read correctly. This is
referred to as Drive Check.
This provides a way to determine whether a failure
during Song Copy (p. 113) or DAT Backup (p. 141) is
due to a problem in the song itself that was saved on
disk, whether the problem is with the connections, or
if there is a problem of some other kind.
If data cannot be read correctly, the display will indi-
cate the song in which the error occurred.
1. Hold down [SHIFT] and press [F6 (UTILITY)].
The Utility menu icon is displayed.
2. Press [F5 (DrChk)]. If "DrChk" does not appear in
[F5], first press [PAGE] until "DrChk" is dis-
played, and then press [F5 (DrChk)].
A list of currently connected drives appears in the dis-
play.
3. Press [
], [ ], [
cursor. Select the drive you wish to check.
At this time, the function buttons work as shown
below.
[F3 (Info)]: Displays information about the drive
[F4 (Exec)]: Executes the Drive Check
[F5 (EXIT)]: Exits the screen.
fig.11-48(info.eps)
4. When you have selected the drive you wish to
check, press [F4 (Exec)].
5. A confirmation message ask you that you want to
proceed with the Drive Check appears in the dis-
play. Press [YES].
6. "STORE Current?" appears in the display. If you
wish to save the current song, press [YES]; if not,
then press [NO]. If you have selected a demo
song, then press [NO].
178
], and [ ] to move the
7. Drive Check is the executed. Progress of the oper-
ation is shown in the display. Do not turn off the
power until the operation is completed.
To Cancel the Drive Check
You can use the following procedure to cancel the
Drive Check.
1. Press [EXIT (NO)].
"Cancel?" appears in the display.
2. Press [YES].
Drive Check is cancelled.
8. When Drive Check is completed, the display
screen appears as shown below.
If the display indicates "No Err"
9-1. The entire disk could be read correctly. Press
[YES].
Return to Play condition.
If the display indicates "___ Err"
The underlines portion will display the number of
times that a read error occurred. Rotate the
TIME/VALUE dial.
The display will indicate "Err" for locations where an
error was found. Locations for which "OK" was dis-
played have no problems.
ResultList (Drive check results)
System: Location where basic data used by the
VS-1680 for recording and playback is
stored
Song List: Location where the saved songs are
managed
InitSong 001:
InitSong 002: Each song (in actual use, the song
name is displayed)
:
InitSong 200:
ClusterInfo. (Cluster information)
Total: Number of clusters on the entire disk
Number of clusters tagged as unusable
Defect:
memory
Number of clusters currently being used
Used:
Free: Number of clusters currently not being
used
X-LinkErr: Number of cross-linked clusters
LooseArea: Number of clusters whose links are lost
IllegalDIR: Number of directories with incorrect con-
tent