Finalized Cd; No Disc; No Disk Drive; Found Illegal Track Pair - Roland VS-2480 Supplementary Manual

Error Messages

Finalized CD!

The CD is a commercial CD or a CD-R/RW disc you have
already finalized. Replace the disc with a blank disc or one
that has not yet been finalized.

Found Illegal Track Pair!

You are trying to Region Edit or Phase Edit (Copy, Move, or
Exchange etc.) between a V-Track recorded using
CDRRecMode and a V-Track recorded using some other
recording mode. Use V-Tracks that were recorded using the
same recording mode.

Operation Failed!

Processing was halted due to insufficient memory or due to
an error that occurred in the disk drive itself. Check your
connections and verify the reliability of your hard drive.

Hardware Error!

There is a problem with the disk drive. Contact the disk
drive's manufacturer or dealer.

Illegal Track!

You are trying to create a new phrase using a V-Track
recorded in CDRRecMode and a V-Track recorded using
some other recording mode. Please use V-Tracks that were
recorded using the same recording mode.

Lack of CD-R Memory!

There is not enough room on the CD-R/RW disc.

Not Enough Free Events!

You have tried to undo or redo when the remaining number
of free project events is less than 200. This operation cannot
be performed.

Lack of IDE Memory!

There is insufficient free space on the internal IDE hard disk
to make the image data file.

MARKER Memory Full!

The project already contains 1000 markers, the maximum
number it can hold. Delete unneeded markers.

Medium Error!

There is a problem with the disk drive media. This disk
cannot be used by the VS-2480/2480CD. In some cases, data
can be recovered using the Drive Check operation.

No CD-R Drive!

Either no Roland CD recorder (CD-R/RW drive) is
connected, or its power is not turned on.

No Data to Write

The project you have selected contains no data.
10

No Disc!

There is no disc in the Roland CD recorder (CD-R/RW
drive). Please insert a disc.

No Disk Drive!

No disk drive is connected or an internal hard disk has not
been installed. Make sure that your disk drive is properly
connected.

No IDE Drive!

The unit has no IDE-type disk drive. Install an internal hard
disk drive.

Not 44.1kHz Project!

The project's sample rate is not 44.1 kHz. Only 44.1 kHz
audio can be written to a CD-R/RW disc.
Unusable Sector!
The disk that you are using is not 512 bytes/sector. This disk
cannot be used by the VS-2480/2480CD.

Drive Not Ready!

The disk drive is not yet ready. Please wait a moment.

Obey Copyrights?

This message asks if you agree to the terms and conditions
regarding the reproduction, broadcast, and sale of the
software. Please carefully read the License Agreement.

Please Insert CD-R Disc!

Either the Roland CD recorder (CD-R/RW drive) loading
tray is still open, there is no CD-R/RW disc in the drive, or
the drive is otherwise not yet ready.

Please Wait...

The operation has not yet completed. Please wait a moment.
SCSI ID Error!
Two or more disk drives are set to the same SCSI ID number.
Reset the hard drives so that each as its own SCSI ID number.
SCSI Not Available!
The SCSI components of the VS-2480/2480CD are not
working. Contact your dealer or qualified Roland service
personnel for service.
Project Protected!
Since Project Protect is on, the operation cannot be executed.
TOC Read Error!
An error occurred while reading the CD-R/RW disc. There is
a problem with the Roland CD recorder (CD-R/RW drive) or
the CD-R/RW disc.