Roland VS-1680 Owner's Manual page 49

4. Specify which source or track is to be output to the MIX bus. Press the
fig.02-25(mix_step1.eps)
Source
Track
V-Track
5. Press [F2 (STEP→)].
6. Only the sources or tracks assigned to the MIX bus are indicated. Press [
fig.02-26(mix_step2.eps)
Cursor
7. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1
selected source input channel SELECT buttons or the track channel SELECT
buttons for the tracks you want to play back. Press [
the cursor. Rotate the TIME/VALUE dial to select the V-track to which you
want to playback.
Source assigned to the MIX bus
Track assigned to the MIX bus
[ ], [ ], and [ ] to move the cursor. Rotate the TIME/VALUE dial to
adjust each of the values.
Input Channel
(STEP←)].
Chapter 2 Basic Operation
] and [
Pan
Level
Track Channel
] to move
],
49