Loading Performance Data From A Dat Recorder (Recover) - Roland VS-1680 Owner's Manual

* To check whether or not a backup has been performed cor-
rectly, we recommend that you carry out the Verify proce-
dure (p. 146).
Disk Capacity Needed for Backup
One 60-minutes tape can back up approximately
330 MB of song data. For example, you need four
60-minutes (or two 120-minutes) tapes to back up
1000 MB of song data. However, the disk space
available for each song decreases as the number
of songs save increases. Look at the display to see
the number of tapes needed to do the backup.
Time Needed for Backup
It takes about 60 minutes to back up 330 MB of
song data. For example, backing up 1000 MB of
data takes about 190 minutes. However, the high-
er the number of songs backed up, the longer it
takes.
Loading Performance Data
from a DAT Recorder
(Recover)
Use the following procedure to load song data that
was backed up on a DAT recorder. If two or more
songs were saved together during the backup, the data
of all songs will be loaded.
* You can recover VS-880 song data backed up using DAT
backup. However, you cannot edit or resave the
recovered data on the VS-1680.
* If you wish to edit VS-880 song data with VS-1680, con-
vert it to VS-1680 song data and create a copy.
1. Connect the DAT recorder to the VS-1680 as fol-
lowing.
fig.09-05b(dat_rc_connect)
Chapter 9 Use with a DAT Recorder (DAT Backup)
Optical
fig.09-05c(dat_rc_connect)
Coaxial
Digtal Out
DAT recorder
Digital Out
DAT recorder
143