Selecting The Portion That Will Be Written To The Cd-R Disc - Roland VS-1824 User Manual

Selecting the Portion that will be Written to the
CD-R Disc
To simplify the task of assembling the track cuts, you can select a desired
area, and register it in the Locator function. For details on registering/
deleting Locator entries, refer to "Using Locators" (Owner's Manual p. 43).
fig.5-02a
1
Move to the time location where you wish to begin writing.
2
Press LOCATOR[1]. The time will be registered in locator 1.
3
Move to the time location where you wish to stop writing.
4
Press LOCATOR[2]. The time will be registered in locator 2.
Add Finishing Touches to Your Song
2 4
If the LOCATOR buttons is
already lit, a locator is
already stored there. You
can either select a different
LOCATOR or clear the
existing locator by holding
[CLEAR] and pressing that
LOCATOR button.
107