Determining Output; Monitor Jacks - Roland VS-1680 Owner's Manual

3. Rotate the TIME/VALUE dial.
Phase
This selects the phase (NRM, INV) for each channel.
Usually, "NRM" is selected.
NRM: Normal phase (same phase as the input)
INV: Inverted phase (opposite phase)
4. Press [PLAY (DISPLAY)].
Return to Play condition.
When Phase Mismatch is a Problem
The situations shown below will result in prob-
lems. In such cases, select "INV." When using a
number of pieces of equipment, it is recommend-
ed that you prearrange the HOT and COLD leads
for all equipment.
fig.11-42(inv.eps)
Mixer Amplifier
The third
HOT
The third
HOT
The second
HOT
When Phase Mismatch is Not a Problem
The situations shown below will not result in
problems. In such cases, select "NRM."
fig.11-43(nrm.eps)
Mixer Amplifier
The second
HOT
The third
HOT
The second
HOT
Mixer Equalizer
The third The second
HOT HOT
Speaker
Speaker
Amplifier Speaker
The third
HOT
Chapter 11 Other Convenient Functions

Determining Output

The VS-1680 features eight analog output jacks and
two digital connectors, each of which can have various
signals assigned to it. Set the output for each output
jacks or connectors using the following procedure.

MONITOR Jacks

1. Press [MASTER].
The Master Block is displayed.
2. Determine what is to be output from the MONI-
TOR jacks. Press [
move the cursor to the "OUTPUT (MON)," and
rotate the TIME/VALUE dial.
fig.11-44a(mon2.eps)
Mon (Monitor)
This selects what sounds are heard through the MON-
ITOR jacks.
Same sound as is heard from the
MST:
MASTER jacks (MIX bus).
EFX1: The sounds assigned to the (EFX1)
EFFECT bus.
The sounds assigned to the (EFX2)
EFX2:
EFFECTS bus.
AUX1/EFX3: Sounds assigned to the AUX1 bus.
With EFFECT B installed, the sounds
are those assigned to the (EFX3)
EFFECT bus.
AUX2/EFX4: Sounds assigned to the AUX2 bus.
With EFFECT B installed, the sounds
are those assigned to the (EFX4)
EFFECT bus.
AUX3/AUX: Sounds assigned to the AUX3 bus.
With EFFECT B installed, the sounds
are those assigned to the AUX bus.
All sounds assigned to the RECORD-
REC:
ING bus.
ST IN: Sounds assigned to Stereo In.
], [ ], [ ], and [ ] to
175