Scrolling The Waveform; Resetting Mixer And System Settings To Their Original State - Roland VS-1680 Owner's Manual

Chapter 12 Making Global Settings and Checking Conditions

Scrolling the Waveform

While the level (waveform) of the sounds is displayed
(p. 184), you can scroll the waveform display.
1. Hold down [SHIFT] and press [F5 (SYSTEM)]. The
System menu icon is displayed. If the System
menu icon does not appear, then press [F6 (EXIT)].
2. Press [F3 (PLAY)]. If "PLAY" does not appear in
[F3], first press [PAGE] until "PLAY" is dis-
played, and then press [F3 (PLAY)].
3. Press [
], [ ], [
cursor to "Waveform Scroll," then rotate the
TIME/VALUE dial.
Waveform Scroll
When this is set to "On," the waveform display scrolls
following playback time.
4. Press [PLAY (DISPLAY)]. Return to Play condi-
tion.
5. Press [F5 (WAVE)]. If "WAVE" does not appear
in [F5], first press [PAGE] until "WAVE" is dis-
played, and then press [F5 (WAVE)].
6. Press [PLAY].
The waveform display scrolls.
192
], and [ ] to move the
Resetting Mixer and System
Settings to Their Original
State
After repeatedly making new settings to the input
mixer, track mixer, and Master Block, as well as after
changing the content of settings in System condition,
you can restore the initial parameters existing when
you started to create a song.
* Even if you restore the settings to their initial state, the
song, scene, tempo map and sync track data will not be
lost. Furthermore, the IDE drive (p. 189), SCSI self ID (p.
188), Scene Mode (p. 40), Shift Lock (p. 187), and
Numerics Type (p. 187) settings will not return to their
default state.
1. Hold down [SHIFT] and press [F5 (SYSTEM)].
The System menu icon is displayed. If the System
menu icon does not appear, then press [F6 (EXIT)].
2. Press [F1 (INIT)]. If "INIT" does not appear in
[F1], first press [PAGE] until "INIT" is displayed,
and then press [F1 (INIT)].
3. "Init Mixer/System PRM Sure?" (Do you want to
restore the initial mixer and system parameters?)
appears in the display. Press [YES]. If you want to
cancel the operation, then press [NO].
4. When the initial conditions are restored, the
System menu icon appears in the display. Press
[PLAY (DISPLAY)].
Return to Play condition.