Roland VS-1680 Owner's Manual page 46

Chapter 2 Basic Operation
8. Make the settings for the effects. Press [
fig.02-21(rec_step3.eps)
Cursor
9. Press [F2 (STEP→)]. You can return to the previous screen by pressing [F1
10. Determine whether or not the effects are to be recorded. First press the
fig.02-22(rec_step4.eps)
46
move the cursor. Rotate the TIME/VALUE dial to adjust each of the values.
Press [F3 (EFX A)] to make settings to EFFECT A (EFX1/2); press [F4 (EFX
B)] to make settings to EFFECT B (EFX3/4).
(STEP←)].
SELECT button for the input channel to which you are applying the effect,
then press the track channel STATUS button for the track to which you want
the effect to be recorded. When you want to assign EFX3/4, then hold down
[SHIFT] when you press the SELECT button. You can also assign one effect
for recording on up to two tracks.
], [
Track to be recorded
], [ ], and [ ] to
Effect Switch
Send Level
Send Balance