Roland VS-1680 Owner's Manual page 43

Monitor Select
Equalizer Mode
Direct Out
Effect Insert
4. When you are finished making the EZ Routing settings, press [F6 (SAVE)].
5. The Routing Save screen appears in the display. Rotate the TIME/VALUE
fig.02-17(ez_save.eps)
6. Press [
At this time, the function buttons work as shown below.
7. After entering the name, press [F5 (Write)].
The routing is saved.
8. Press [PLAY (DISPLAY)].
Return to Play condition.
dial to select the destination routing number.
Routing Number
Routing Name
] to move the cursor. Press [
rotate the TIME/VALUE dial to select the User Routing name.
[F1 (Hist)]: Pressing this button takes you through a register of the last 20
names entered, one at a time.
[F2 (Clr)]: Clears all characters in the window.
[F3 (Del)]: Deletes the character where the cursor is positioned.
[F4 (Ins)]: Inserts a space where the cursor is positioned.
[F5 (Write)]: Confirms the routing and exits the screen
Exits the screen without accepting the routing.
[F6 (EXIT)]:
Master Block Settings
], [ ], [
Chapter 2 Basic Operation
], and [ ] and
43