Connecting To A Node Or A Room On The Internet - Yaesu WIRES-X TM-400XDE Instruction Manual

Connecting to a node or a room on the Internet

The Portable Digital Node Mode may be not connected to anything other than a Digital Room or a Digital Node. In order to
connect with the analog node station, it is necessary to use the Portable HRI Mode (page 49).
Connection to an Internet Digital Node or a Digital Room may be made in the following two ways:
(1) Connecting to a node or a room by operating the WIRES-X software on the PC
(2) Connecting to a node or a room by operating the transceiver of the portable node
(1) Connecting a node or a room by operating the WIRES-X software on the PC
On the WIRES-X software main screen, you can easily connect to the desired room or node station.
1. Click the Digital Node or Digital Room to connect.
• Icon of a digital room or a digital node
: Digital Open room (Only the Digital Nodes
may be connected)
: Digital Node Station
: Portable Digital Node Station
2. Right-click on the selected Digital Node or Digital Room.
The command list is displayed.
3. Click the [connect].
When a connection is successfully established, the
IDLE indicator "
indicator "
Node station or Room "
"Connected" will appear on the LCD of the portable
node station's transceiver or the transceiver accessing
the portable node station in WIRES-X mode.
z Room Pop-up Window
When connecting to the room a window will pop up displaying the operational status of the room. For details, refer
to "Room pop-up window" (page 56).
" will change to the NET
", and the User ID of the connected
" is displayed.
36