Connecting To A Node Or Room On The Internet - Yaesu FT3DR Instruction Manual

Connecting to a node or room on the Internet

You can connect to the desired node or room in one of the following ways:
• Selecting an accessible node or room from the list
• Specifying the node name or room name
• Selecting the most recently connected node or room
• Specifying the DTMF ID of the node or room you want to connect to
z Searching from the node & room lists
1
While displaying the local node, touch [SEARCH &
DIRECT].
Displays the category list.
2
Touch [ALL].
Displays the list of accessible nodes and rooms.
Tips • Connection destinations are displayed from the room list
and then node list.
• On the connection destination room columns, the
number of activities (the number of nodes connected to
each room) appears on the right side.
3
Touch the node or room you want to connect to.
Starts connection.
Tip Rotate the DIAL to select the node or room you want to
connect, then press PTT to establish a connection
Once connection is successfully established, the
menu list of the node (room) you are connected to will
appear.
Tip If connection is unsuccessful, an error message appears
and the screen returns to the list of nodes and rooms.
.
10
JQ1YBG-ND1 Shinagawa-
SEARCH & DIRECT
C1:----------------
C2:----------------
C3:----------------
C4:----------------
C5:----------------
ALL
CQ-OPEN-ROOM
JA1YOE-TKY-ROOM
JA1YOE-ROOM-B
JA1YOE-ROOM-C
JQ1YBG-13-ROOM-B
JA1YOE-TKY-ROOM
EMERGENCY
NEWS STATION
LOCAL NEWS
INT NEWS
[999]
194
21
16
9
8