Checking Received Messages And Images - Yaesu FTM-200DR Instruction Manual

Checking Received Messages and Images

Use the GM function to check the messages and images on the LOG list.
When using a GM function, a beep sounds when a new message or image is received, and
the "LOG MSG" or "LOG PICT" list screen (see step 3 below) appears automatically.
1. Press the [GM] key.
2. Press the [F menu] key, then rotate the DIAL knob to
select [LOG], then press the DIAL knob.
3. Rotate the DIAL knob to select [MESSAGE] or [PICT].
VOICE: Audio recorded (Only playback of record-
ed content is possible.)
MESSAGE: Text Message
PICT: Image
4. Press the DIAL knob.
Select "MESSAGE" or "PICT" to display the LOG MSG
list or LOG PICT list.
The icons on the left side of the LOG list indicate the
following:
Message received (unread)
Message received (read)
Message sent
Message failed to send
Image received (unread)
Image received (read)
Image sent
Image failed to send
Image taken with the camera built in the optional
microphone
5. Rotate the DIAL knob to select to the message or image to be displayed, then press
the DIAL knob.
• The selected message or image will be displayed.
• Press the [F menu] key, then rotate the DIAL knob to select [FWD], then press the
DIAL knob to forward the checked message or image data. Refer to "Forwarding
the Checked Message or Image Data (page 12).
7
JA1YOE-123 JQ1YBF-0AB
JA7YWC-022 JH1YPC-FGH
JA1ZRL-CDE JA2YSO-789
LOG
VOICE
MESSAGE
PICT
LOG MSG
NEW
JA6YPC- 7 12:34
JA1YOE-13 08:56
JQ1YBF- 9 06:17
JQ1YBG-14 05/05
JA1ZRL- 9 04/24