Exchanging Messages Or Images; Viewing The Message Or Image List - Yaesu FTM-100DR/DE Operating Manual

Exchanging messages or images

While operating in digital mode, you can receive messages (text data) or images.
Transmitted and received messages and images are all saved in the common list.
Cautions
z To receive a message or image, press
Mode Select Function) or digital mode in advance.
z When sending a message or image, the communication mode automatically switches to digital
mode.
z To save images, insert a micro-SD memory card into the transceiver (
Tips
There are three types of digital mode as follows. For details, see "Selecting communication mode" on
page 39.
• V/D mode (simultaneous voice/data communication mode)
• Voice FR mode (voice full rate mode)
• Data FR mode (high speed data communication mode)

Viewing the message or image list

You can display the list of transmitted and received data. You can also select the desired
data to check it.
1
Press and hold
Displays "LOG SELECT" on the screen.
2
Rotate the DIAL to select [GM
[GM PICT], then press
When [GM
MESSAGE" screen appears.
When [GM
screen appears and the images and time stamps
are listed.
Press (
switch the display to image size display. Pressing
each time switches the display.
96
for over one second.
MESSAGE] or
.
MESSAGE] is selected, the "GM
PICT] is selected, the "GM PICT"
appears on the upper side) to
to switch the communication mode to AMS (Automatic
page 32).