HP PS1810 Management And Configuration Manual page 72

Link Layer Discovery Protocol (LLDP)
LLDP Configuration
Table 8-1. LLDP Configuration Fields
Field
Global Mode
Transmit Interval
Transmit Hold
Re-Initialization Delay
Notification Interval
Interface Mode
Interface
Transmit Enable
Receive Enable
Enable Notification
Transmit Mgmt Info
Click Apply to save any changes for the current boot session; the changes take effect immediately.
8-2
Description
Specify the interval at which frames are transmitted. The default is 30 seconds, and the
valid range is 5–32768 seconds.
Specify the multiplier on the transmit interval to, which is used to compute the TTL (range
2–10, default = 4).
Specify the delay before a re-initialization (range 1–10 seconds, default = 2).
Specify a limit for the transmission of notifications (range 5–3600 seconds, default = 5).
The list of all physical and trunk interfaces on the system.
Enable or disable the transmission of LLDP PDUs. The default is enabled.
Enable or disable the ability of the port to receive LLDP PDUs. The default is enabled.
Enable to have LLDP generate a log file entry.
Enable or disable the transmission of management information with the LLDP PDUs. The
default is enabled.