Example-Creating A Trunk - HP PS1810 Management And Configuration Manual

LACP Passive—Trunk will only participate if the other end sends LACPDUs (other end is
■
active).
Click Apply to save any changes to the currently selected trunk. The changes take effect immediately.
Example—Creating a Trunk
Follow these instructions to set up a trunk and manually add port members using the Static mode.
1. Click Trunk > Trunk Configuration in the navigation pane to display the Trunk Configuration page.
Figure 6-2. Trunk Configuration Page
In the Name field, enter a name for the new trunk you wish to set up.
2.
Figure 6-3. Trunk Name
Use the Mode drop-down list to select a mode for specifying the trunk members.
3.
Trunk Configuration and Membership
Trunks
6-3