Select Server From Discovered List - HP PS1810 Management And Configuration Manual

Servers
Monitor Servers
Table 11-1. Monitored Server Fields
Field
Monitored Servers
Server: System Health
Server Product Name
Server: iLO IP Address
Delete
Add New Server to Monitored List
Add Server
■

Select Server from Discovered List

Use the Add Server drop-down list on the Monitor Servers page to select this option and display a list
of discovered servers from which you can select the iLO enabled servers you wish to monitor. The
switch attempts to reach iLO enabled servers using SSDP discovery protocol. A maximum of 100
recently discovered servers can be listed. The discovered servers list is cleared following a reboot.
N o t e
Server must be running iLo4 v1.3 or above for auto-discovery to function.
Figure 11-2. Discovered Servers Options
11-2
Description
System health indicator for monitored server.
OK—
Degraded—
Failed—
Not Available—
Monitored server name. A maximum of ten servers can be monitored.
IP address of the monitored server. Click the IP address to connect to the server. If the iLO IP
address has changed, an alert icon (
display the new IP address.
Select to mark a server for deletion. Click Apply to delete the marked server.
Use the drop-down list to choose the method for adding a server to the monitored list
Click Apply to save the method used to add the server (Manually or Select from Discovered
List).
System is fully operational.
System is operating at a reduced capacity.
One or more components are not operational.
System status cannot be ascertained.
) is displayed. Click the icon to update the link and