Yamaha FX10X Service Manual page 721

BACK BUZZER DOES NOT SOUND. (FX10/FX10RTR/FX10RTRA/FX10MTR/FX10MTRA)
Check the main fuse, ignition fuse, and signal fuse.
Refer to "FUSE INSPECTION" in CHAPTER 2.
FAULTY
OK
Check the battery.
Refer to "BATTERY INSPECTION" in CHAPTER 2.
OUT OF SPECIFICATION
OK
Check the stator coil.
Refer to "CHARGING SYSTEM".
OUT OF SPECIFICATION
OK
Check the engine stop switch and main switch.
Refer to "IGNITION SYSTEM".
FAULTY
OK
Check the load control relay.
Refer to "LIGHTING SYSTEM".
FAULTY
OK
Check the DC back buzzer.
DOES NOT SOUND
OK
Check the signal system wiring.
Refer to "CIRCUIT DIAGRAM".
FAULTY
OK
Correct the connection and/or replace the rectifier/
regulator and/or ECU.
SIGNAL SYSTEM
Replace the main fuse, ignition fuse, and/or signal
fuse.
Replace or charge the battery.
Refer to "BATTERY INSPECTION" in CHAPTER
2.
Replace the stator coil.
Replace the right handlebar switch and/or main
switch.
Replace the load control relay.
Replace the DC back buzzer.
Properly connect or repair the signal system wir-
ing.
8-32
– +
ELEC