Personalize Pc Settings; Auto Log-Off; Automatic Deletion Of Events - Siemens SiPass Entro Operation Manual

Start the software
5.2

Personalize PC settings

5.2.1 Auto log-off

5.2.2 Automatic deletion of events

16
Building Technologies
Fire Safety & Security Products
If the Auto log-off function is enabled, SiPass Entro, Installer and Door and event
monitor will automatically be logged off if any of these programs have been idle
(not used) for a certain time.
This is how to set the desired settings:
1. Open the Entro [ 13] application.
2. Select on the menu System > System users.
3. Select a system user.
4. Click on the Edit button.
5. Click the Advanced tab.
6. In the top box, select whether or not automatic log-off should be applied and for
how long the programs have to be idle before they are logged off (pull the
indicator to the desired number of minutes).
7. Click OK.
In SiPass Entro, information about events in the system, e.g. entries, are stored
daily. To free disk space, event files can be deleted automatically after a certain
time or when a certain file size is obtained.
Proceed as follows:
1. Open the Entro [ 13] application.
2. Select on the menu System > System users.
3. Select a system user.
4. Click on the Edit button.
5. Click the Advanced tab.
6. Select when events should be deleted:
By time. Select the check box and set the desired number of days. Event

files where the latest event is this old will automatically be deleted.
By size. Select the check box and set the desired file size in Megabytes.

The entire event file is deleted when this file size is reached.
7. Select if event files should be moved to the waste paper basket when they are
deleted or if they should disappear at once.
8. Click OK.
052_SiPass_Entro_6_5_A24205-A335-B318_e_en
10.03.2010