Indicators For Communication Status - Siemens SiPass Entro Operation Manual

Start the software
5.1

Indicators for communication status

14
Building Technologies
Fire Safety & Security Products
Indicators in the application windows
In the bottom right of the box there are two indicators:
If the text ON LINE and a green indicator are displayed, the PC and the SiPass
Entro application are connected to the access control system.
If the text OFF LINE and a red indicator are displayed, SiPass Entro has no contact
with readers and controllers. This means that the information registered in the PC
does not reach the segment controllers.
If the text DB UP TO DATE (DB = database) and a green indicator are displayed,
the segment controller connected to the actual PC, have the same information as
the PC.
Note that in some circumstances (like upgrading, larger import of persons etc)
there could be a delay in the transferring of information from the "first" controller to
the next. Please study the display information in each SR35i for the correct status
information.
If the text DB OUT OF DATE and a red indicator are displayed, the segment
controllers do not have the same information as the PC. Note that a certain amount
of time may pass before the information has reached all segment controllers and
that the system has to be ON LINE for this to be possible.
You can also look at the status bar to see how far the transferring of data to the PC
has gone. Normally it might be events that are transferred (in cases where the PC
has been OFF-LINE)
The default setting is that you will automatically be logged out of the system if no
task is performed within 15 minutes. In the Entro application you may set the
desired number of minutes [ 16] or disable.
052_SiPass_Entro_6_5_A24205-A335-B318_e_en
10.03.2010