Holiday Periods - Siemens SiPass Entro Operation Manual

General half-days, public holidays and holiday periods

10.3 Holiday periods

24
Building Technologies
Fire Safety & Security Products
1. In this section you will find instructions on how to enter holiday periods, if any.
Holiday periods belong to the time zone Other time.
2. Click the Holidays tab and click New.
3. Enter the start date of the holiday period in the yymmdd format, e.g. 000630, or
click the Calendar button (in the The calendar [ 43] section you will find
instructions on how to use the calendar).
4. Enter the end date of the holiday period in the yymmdd format, e.g. 000831, or
use the calendar.
5. Check that the information is correct, and then click OK. The Holidays tab is
redisplayed with the holiday period filled in. These periods can be re-used by
the time schedules.
6. Click OK to close the Holidays tab.
052_SiPass_Entro_6_5_A24205-A335-B318_e_en
10.03.2010