Printouts; Configured Information; Events - Siemens SiPass Entro Operation Manual

Printouts

22 Printouts

22.1 Configured information

22.2 Events

56
Building Technologies
Fire Safety & Security Products
SiPass Entro provides you with two types of printouts:
Configured information. At any time you can print the information you have

configured about time schedules, doors, access groups and persons. Print the
information by choosing Print on the File menu. This type of information can
only be printed to printers directly connected to your PC.
Events. This type of information can be printed to a printer connected to the PC

or automatically to a printer directly connected to a segment controller.
Proceed as follows:
1. Choose Print on the File menu.
2. Choose what information to print. In the above example the Persons option is
pre-set. SiPass Entro automatically suggests the option corresponding to the
tab being active when you chose Print.
The Selected persons, Selected doors etc. options mean that only information
about the person, door etc. selected on the tab is printed (make your selections
before you choose Print). By clicking Preview you can view the printout on your
PC's screen.
Events can be printed from the Door and event monitor.
Proceed as follows:
1. Open an event log by choosing Event logs on the File menu (if it is not already
displayed).
2. Right-click somewhere in the event window.
 A menu is displayed.
3. Choose Change filter.
4. Select the types of events to be displayed.
5. Click OK.
6. Choose Print on the File menu
052_SiPass_Entro_6_5_A24205-A335-B318_e_en
10.03.2010