Using The System; Entrance; Arm And Disarm An Intrusion Alarm System - Siemens SiPass Entro Operation Manual

Access control system
Hide thumbs Also See for SiPass Entro:
Table of Contents

Advertisement

24

Using the system

24.1 Entrance

24.2 Arm and disarm an intrusion alarm system

Building Technologies
Fire Safety & Security Products
In this section the functions of SiPass Entro are described from the viewpoint of a
person entering the building. How do you get in? How do you set an intrusion
alarm?
People entering the building can open a door in several different ways, depending
on the security level:
By using their card at the card reader of a door terminal.
By using their card at a card reader.
By entering a group code at a card reader or a PIN reader.
By using their card and entering the PIN at a card reader.
If the card/code is accepted, the green LED is lit and the lock is opened.
If the person entering the door enters the wrong PIN three times in succession, the
card will be blacklisted and must be re-validated at the PC. To indicate that a card
is blacklisted for this reason, two asterisks (**) are displayed in front of the person's
name on the Persons tab in SiPass Entro. Double click the person's name to
withdraw the cancellation.
The red LED (if it exists) on the reader can indicate in two ways that the alarm is
activated.
- Either permanently on all readers in the zone.
- For a certain time and only on the reader where the command is performed. All
other methods do not turn on the LED at all.
To be able to arm and disarm an intrusion alarm system, the person must be a
member of an access group with authorization to arm and disarm intrusion alarms.
Certain access groups can have authorization to arm an intrusion alarm only,
while other access groups may only be allowed to disarm an intrusion alarm.
all rights
System users with
icons in the Door Monitor application.
Arm an intrusion alarm system – with a card
1. Press B on a door terminal.
2. Use the card through the reader and enter your PIN (depends on the current
security level).
 The alarm is armed.
also can arm and disarm an intrusion alarm via the
052_SiPass_Entro_6_5_A24205-A335-B318_e_en
Using the system
59
10.03.2010

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents