Register System Users - Siemens SiPass Entro Operation Manual

Register system users

14 Register system users
36
Building Technologies
Fire Safety & Security Products
In SiPass Entro you can register several system users, i.e. several people with
authorization to configure the system.
Several system users can be on-line concurrently if the system has been prepared
for this. See section Multi-user environment (more PCs).
The people appointed as system users can also be registered in the system as
persons. In the Add and configure persons [ 31] section you will find instructions
on how to do this.
The first time you register a system user you can only choose the All rights level.
The reason for this is that there has to be at least one system user with
authorization to perform all tasks in the system. Also note that the user name
bewa and the password pass will disappear as you register a system user for the
first time.
This is how to register system users:
1. Open the Entro [ 13] application.
2. Choose in the menu System > System Users.
 The names of existing system users are displayed in this window. If you
have not registered any system users yet, the window is empty.
3. Click New. The System users window is displayed.
4. Enter a suitable name in the User name field.
Optionally you can tie a card to this User by clicking the down arrow in the next
field to display a list of registered persons. This may be used in applications
using a physical card for login.
5. Select the desired name.
6. Choose a password and enter it in the Password field (16 characters at the
most).
7. Enter the password once again in the Verify password field.
8. Choose the desired user level for the system user you have registered.
If the person should have authorization to make all types of changes in the

system, choose All rights.
If the person should have authorization to all functions except the ones

reached from the System menu, choose All rights except system
properties.
If the person should only have authorization to register, change and delete

information about persons, choose Person properties only.
If the person should have authorization to remotely open doors with the

PC in the Door monitor program choose Door control.
If the person acts as an Installer.

9. Select the door& event filter to use, enter the connection and the folder to store
events on for this System User. You can read more about filters in the section
Event and door filters [ 41] .
052_SiPass_Entro_6_5_A24205-A335-B318_e_en
10.03.2010