Table of Contents
Advertisement
Settings for USB Storage Devices
Item
Enable USB Storage
Enable Automount
3. Click Save to save your change.
NOTE
• For your changes to take effect, you need to restart your system.
4.4.4
Manually Mount and Unmount Attached USB Storage Devices
To mount/unmount an attached USB storage device, please do the following:
NOTE
• If Enable Automount is checked (see section "4.4.3 Configuring Settings for USB
Storage Devices" on page 68), then an attached USB storage device will be
mounted automatically.
1. Right click the desktop icon of the attached USB storage device.
2. A popup menu appears.
3. Click to select Mount Volume/Unmount Volume to mount\unmount the attached USB storage device.
Tick/Untick this checkbox to allow/disallow the access of USB storage devices.
NOTE: To use the locally attached USB storage devices in an RDP / ICA / View
session, the mapping of local USB storage devices must be enabled
in this session's RDP / ICA / View connection settings. For detailed
instructions and more related settings, please refer to sections:
"4.6.5 Configuring Advanced RDP Connection Settings" on page 111
"4.6.8 Configuring Advanced ICA Connection Settings" on page 145
"4.6.11 Configuring Advanced View Connection Settings" on page 172
Tick/Untick this checkbox to enable/disable the automount of
USB storage devices.
NOTE: If this setting is disabled, users need to manually mount the attached
USB storage devices. For detailed instructions, please refer to section
"4.4.4 Manually Mount and Unmount Attached USB Storage Devices" on
page 69.
69
Configuring Client Settings
Configuring External Device Settings
Description
Advertisement
Table of Contents
