ViewSonic SC-T35 User Manual page 124

Common Settings
Item
Autostart When Startup
On Application Exit
Description
Select whether to open a Remote Desktop session automatically or not when SC-
T35 is started up (Autostart mode).
NOTE: There are three similar but different modes for your SC-T35 and only one
mode will take effect if all are enabled. Three modes and the order of
priority are listed as follows:
No. Mode Description
The client will start up directly with the desired
1 Appliance Microsoft RDP session and turn off after existing
the session.
The client will start up directly with the desired
Microsoft RDP session and perform the configured
action after existing the session.
Available actions include:
2 Autostart
The default. The client will enter ViewSonic Quick
3 Quick Connection
Connection screen after system startup.
NOTE: To use the Autostart mode, ensure that the Appliance mode is disabled.
Select what to do when a Remote Desktop session is ended. Five options are
available: Do Nothing, Restart Application, Force-Restart Application,
Reboot, and Shutdown.
Option
Do Nothing
Restart Application
Force-Restart Application
Reboot
Shutdown
113
Configuring Client Settings
Configuring Service Access Settings
• Returning to the local desktop
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
Description
Returns to the SC-T35 local Linux desktop.
Opens a Remote Desktop session again.
Opens a Remote Desktop session again and
skips any messages in-between.
Restarts your SC-T35.
Turns off your SC-T35.