Configuring Settings For Usb Storage Devices - ViewSonic SC-T47 User Manual

Configuring Client Settings
Configuring External Device Settings
4.3.3

Configuring Settings for USB Storage Devices

To configure settings for USB storage devices, please do the following:
1. On ViewSonic Client Setup, click Devices > USB Storage.
2. Click the drop-down menu to select the desired setting. Three options are available: Enable USB Storage,
Read-Only Access, and Disable USB Storage.
NOTE
• When Enable USB Storage is selected, settings of RDP / ICA connection entries
under Applications tab may affect if you can use mapped USB storage devices in
remote / virtual desktop sessions. For details, please refer to sections:
• When Disable USB Storage is selected, Citrix ICA and VMware View / Horizon View
sessions may still allow users to use locally attached USB storage devices
through redirection. To really prevent the use of USB storage devices in virtual
desktop sessions, some configurations in Citrix and VMware service delivery
environments are required.
3. Click Save to store your change.
— "4.5.5 Configuring Advanced RDP Connection Settings" on page 66
— "4.5.8 Configuring Advanced ICA Connection Settings" on page 94
48