Configuring Client Settings
Configuring External Device Settings
4.4.5
Disabling or Enabling Attached Audio Devices
To disable/enable attached audio devices, please do the following:
NOTE
• If you disable locally attached audio devices, client users are not allowed to perform
audio playback or recording with these devices in an RDP / ICA / View session.
• To perform audio playback or recording with local audio devices in an RDP / ICA /
View session, you need to enable locally attached audio devices here
(the Audio setting item under Devices tab) and configure audio related settings
in the RDP / ICA / View connection settings. For detailed instructions, please
refer to sections:
1. On ViewSonic Client Setup, click Devices > Audio.
2. Click to check/uncheck Enable System Audio Device.
3. Click Save to confirm your selection.
NOTE
• The change will not take effect until SC-T35 has been restarted.
"4.6.5 Configuring Advanced RDP Connection Settings" on page 111
"4.6.8 Configuring Advanced ICA Connection Settings" on page 145
"4.6.11 Configuring Advanced View Connection Settings" on page 172
70