Table of Contents
Advertisement
Setting Up Your SC-T35
Positioning Your SC-T35
2.1 Positioning Your SC-T35
There are two ways to position your SC-T35:
• Put it (with its stand) on a desk or a desired place uprightly.
• Mount it on the back of a monitor using a VESA mount kit.
To mount your SC-T35 on the back of a monitor, please follow the steps below:
Step 1:
Remove the Stand from Your SC-T35
Step 2:
Understand Your Stand / VESA Mount Kit for SC-T35
Step 3:
Store Away Screws inside the Bracket
Step 4:
Remove Screws from the Bracket
Step 5:
Mount Your SC-T35
Step 1: Remove the Stand from Your SC-T35
To remove the stand from your SC-T35, please do the following:
1. Place your SC-T35 on a flat surface with the stand side upward.
2. Remove the screw that fixes the stand to your SC-T35.
3. Store away the removed screw inside the stand. Detailed instructions will be
Step 2
and 3.
provided in
NOTE
• It's highly recommended to store screws away inside the stand when not needed
to prevent them getting lost.
8
Advertisement
Table of Contents
