Table of Contents
Advertisement
Topic 1: Powering On Your SC-T35
To start using your SC-T35, please do the following:
1. Ensure that your monitor(s) is connected and turned on.
NOTE
• Please note that you need to connect and turn on your monitor(s) before
powering up the thin client. Otherwise, the client may fail to set an appropriate
resolution for the monitor(s).
2. Press the Power button to turn on the client. Wait a moment for ViewSonic Quick Connection screen to
appear.
Topic 2
to set the time zone for the first time use.
3. (a) Go to
Topic 4
(b) Go to
if the time zone had been set.
Icon
Description
Power Off
Click the icon to shut down or restart the system.
Click the icon to enter the local Linux desktop.
Local Desktop
To return to this screen from the local Linux desktop, see
Setup
Click the icon to launch ViewSonic Client Setup.
Indicates the network type (wired or wireless) and status.
Network
Click the icon to configure network settings.
ViewSonic Quick Connection Screen
15
Getting Started
Learning the Basics
Topic
3.
Advertisement
Table of Contents
