Establishing And Stopping A Wireless Connection - ViewSonic SC-T35 User Manual

Configuring Client Settings
Configuring Network Settings
4.5.8

Establishing and Stopping a Wireless Connection

The Wireless setting enables you to establish/stop a wireless connection for your SC-T35 thin client.
NOTE
• Before you can access available wireless networks, you need to install an external
and USB-based wireless network adapter. Ensure that you have set up the required
wireless network adapter.
• Your package may not include a wireless network adapter (optional). Please contact
your dealer for compatible adapters if needed. It's recommended to check with your
dealer first if you plan to purchase one by yourself.
• The Wireless setting also allows you to configure and manage wireless network
settings. For details on how to configure and manage wireless network settings,
please refer to section "4.5.9 Configuring Wireless Network Settings" on page 91.
Establishing a Wireless Network Connection
To establish a wireless network connection for your SC-T35 thin client, please do the following:
1. On ViewSonic Client Setup, click Network > Wireless to open the Wireless Network list.
NOTE
• Your SC-T35 will perform network discovery once and specify all available wireless
networks. To refresh, click Scan on the top of the Wireless Network list.
2. Click to check the desired wireless network. The Connect
Wireless Network list.
button then appears on the top of the
88