Configuring Settings For Usb Storage Devices - ViewSonic SC-T45 User Manual

Sc-t45 user guide m region (english)

Hide thumbs Also See for SC-T45:

Table of Contents

Configuring Client Settings

Configuring External Device Settings

3.3.3 Configuring Settings for USB Storage Devices

To configure settings for USB storage devices, please do the following:

1. On ViewSonic Client Setup, click Devices > USB Storage.

2. Click the drop-down menu to select the desired setting. Three options are available: Enable USB

Storage, Read-Only Access, and Disable USB Storage.

NOTE

• If you disable locally attached USB storage devices, client users are not

allowed to use those devices in a Remote Desktop session.

• To use the locally attached USB storage devices in a Remote Desktop session,

you need to further configure the RDP (Remote Desktop Protocol) connection

settings under Applications tab. For detailed instructions, please refer to

section "3.5.5 Configuring Advanced RDP Connection Settings" on page 38.

3. Click Save to store your change.

Table of Contents