Table of Contents
Advertisement
Getting Started
Learning the Basics
3.1 Learning the Basics
The following topics will guide you through the basics of using your SC-T35:
Topic 1:
Powering On Your SC-T35
Topic 2:
Configuring the Time Zone
Topic 3:
Returning to the Quick Connection Screen (if needed)
Topic 4:
Accessing Desktops or Applications
•
Microsoft Remote Desktop Services (RDP sessions)
•
Citrix Services (ICA sessions)
•
VMware View or Horizon View Services (View sessions)
NOTE
• Three client modes are available for your SC-T35:
• In Quick Connection mode, you can access Microsoft Remote Desktop /Citrix /
VMware View or Horizon View services quickly without much client configuration
required. The main purpose of this chapter is to guide you through the use of your
SC-T35 under the Quick Connection mode.
• To understand other modes, configure advanced settings, and customize your
SC-T35, please refer to chapter 4 "Configuring Client Settings" on page 31.
No.
Mode
Description
The client will start up directly with the desired
1
Appliance
RDP / ICA / View session and turn off after
existing the session.
The client will start up directly with the desired
RDP / ICA / View session and perform the
configured action after existing the session.
Available actions include:
2
Autostart
• Returning to the local desktop
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
The default. The client will enter ViewSonic
3
Quick Connection
Quick Connection screen after system startup.
14
Advertisement
Table of Contents
