Table of Contents
Advertisement
4.2.6
Updating Firmware from the Management Computer
Update Firmware allows client users to update firmware from its management computer.
NOTE
• Ensure that your SC-T35 has been added into a managed group under ViewSonic
Device Manager installed on a remote computer, and that you have imported client
firmware files into ViewSonic Device Manager. These are prerequisites of this feature.
• For more information on firmware update and ViewSonic Device Manager, please
refer to the User Manual for ViewSonic Device Manager.
To update firmware from the management computer, please do the following:
1. On ViewSonic Client Setup, click System > Firmware Update.
2. Under the Firmware Update section, click Check Firmware.
3. Upon completion, a window appears notifying you that the Firmware list has been loaded.
4. Click Yes to continue.
Configuring Client Settings
Configuring System Settings
41
Advertisement
Table of Contents
