Table of Contents
Advertisement
Monitor Settings
Item
Enable Auto-Detection at
Power-up
Monitor Resolution
Monitor-1 (DVI-I) Resolution
Description
Check/Uncheck to enable/disable the automatic detection of the attached
monitor(s) when the client is powered on.
Option
Description
Automatic detection of the attached monitor(s) is enabled.
Enabled
The system would set an appropriate resolution for the
attached monitor(s) when the client is powered on.
Automatic detection of the attached monitor(s) is disabled.
All resolutions supported by the client will be listed in the
Disabled
Resolution drop-down menu when Auto-Detection at
Power-up is disabled. Please note that some resolutions
may not be applicable to your monitor(s).
Use this item to set an appropriate resolution for the attached display.
Option
Description
This option is available only when Enable Auto-Detection
Auto
at Power-up is selected.
Other
Select the desired resolution from the Resolution drop-down
options
menu for the attached display.
NOTE: All resolutions supported by the client will be listed in the Resolution
drop-down menu when Auto-Detection at Power-up is disabled.
Please note that some resolutions may not be applicable to
your monitor(s).
This item is available only for SC-T35 and only when 2 is selected in the Number
of Display drop-down menu.
Use this item to set an appropriate resolution for the attached DVI-I display.
Option
Description
This option is available only when Enable Auto-Detection
Auto
at Power-up is selected.
Other
Select the desired resolution from the Resolution drop-down
options
menu for the attached display.
NOTE: When Auto-Detection at Power-up is disabled, all resolutions
supported by the client will be listed in the Resolution drop-down menu.
Please note that some resolutions may not be applicable to
your monitor(s).
59
Configuring Client Settings
Configuring User Interface Settings
Advertisement
Table of Contents
