Table of Contents
Advertisement
Configuring Client Settings
Configuring User Interface Settings
4.3.7
Configuring Screensaver Settings
To configure screensaver settings for your SC-T35, please do the following:
1. On ViewSonic Client Setup, click User Interface > Screensaver.
2. Click drop-down menus or tick/untick checkboxes to choose desired settings.
Screensaver
Item
Enable Screensaver
Display Mode
Display After (minute)
Enable Display Sleep Mode
Enter Display Sleep Mode after
Screensaver (minute)
On Resume, Password Protect
TIP
• While setting wait time for screensaver, you can hang your mouse over the Up/
Down arrow to quickly scroll up/down the Minute list.
3. Click Save to apply.
Check/Uncheck to enable/disable Screensaver.
Click to select the display mode of the screensaver. Two options are available:
Blank and Logo.
Option
Description
Blank
Displays a black screen.
Logo
Displays the ViewSonic floating logo.
Click to select the wait time for screensaver.
Check to turn off (i.e. stop sending signals to) the display to maximize the
energy savings.
Click to select when to turn off (i.e. stop sending signals to) the display after
Screensaver starts.
Check/Uncheck to resume with/without a password.
66
Description
Advertisement
Table of Contents
