Getting Connected - ViewSonic SC-T35 User Manual

Setting Up Your SC-T35

Getting Connected

2.3 Getting Connected
To make connections for your SC-T35, please do the following:
1. Connect your SC-T35 to your local network with an Ethernet cable.
2. Connect a keyboard and mouse to your SC-T35.
3. Connect and turn on the monitor(s).
NOTE
• For your SC-T35, if only the VGA monitor is available, use the supplied DVI-I to VGA
adapter to connect your SC-T35 and monitor.
• Please note that you need to connect and turn on your monitor(s) before
powering up your thin client. Otherwise, the client may fail to set
an appropriate resolution for the monitor(s).
4. Connect your SC-T35 to a power outlet using the AC adapter included in the package.
NOTE
• For detailed instructions on how to assemble the supplied AC adapter, please refer
to section "2.2 Assembling the AC Adapter" on page 11.
5. Connect other peripherals for your SC-T35 if needed.
DVI-I to VGA
adapter
DVI-I port
(SC-T35 only)
VGA cable
12