Updating Firmware From The Management Computer - ViewSonic SC-T45 User Manual

Sc-t45 user guide m region (english)

Hide thumbs Also See for SC-T45:

Table of Contents

3.2.5 Updating Firmware from the Management Computer

Update Firmware allows client users to update client firmware from the remote management computer.

NOTE

• Ensure that your client has been added into a managed group under

ViewSonic Device Manager installed on a remote computer, and that you

have imported client firmware files into ViewSonic Device Manager. These are

prerequisites of this feature.

• For more information on firmware update and ViewSonic Device Manager,

please refer to the User Manual for ViewSonic Device Manager.

To update client firmware from the remote management computer, please do the following:

1. On ViewSonic Client Setup, click System > Firmware Update.

2. Under the Firmware Update section, click the Firmware Type drop-down menu to select Firmware.

The system will then automatically download the Firmware list from the remote computer.

NOTE

• For information on the option Snapshot, please refer to sections "3.2.6 Taking

Snapshots for System Backup and Recovery" on page 23 and "3.2.7 Restoring

the System State with a Created Snapshot" on page 24. You can also update

the firmware of a client with a snapshot (the system backup of a client) which

is coming from another client of the same model and is with a newer firmware

version.

Configuring Client Settings

Configuring System Settings

Table of Contents