Table of Contents
Advertisement
1.
Introduction
VTOS has been optimized to deliver maximum Thin Client performance on the
SC-T25, SC-T36 & VS RePC Devices by using Assembly Language routines and
making full use of the integrated H.264 Hardware decoder.
2.
VTOS management
VTOS is managed with the ViewSonic Device Manager 3.0 (VDM3.0) which may be
used for a variety of tasks, ranging from something as simple as rebooting a VTOS
Device, to upgrading the Device with the latest VTOS software. VDM3.0 runs on
Windows and Linux.
A Linux version of VDM3.0 is integrated into VTOS, this can be enabled by changing
the VTOS Protocol to VDM3.0.
3.
VTOS boot up & quick start tips below
VTOS has the same look and feel regardless of the Device that it is running on,
Devices may be configured to auto connect to a Remote Desktop and or auto login
or boot to the local Desktop. Configuration may be carried out using VDM3.0 or the
local Configuration menu which is selected by clicking on the Configure Tab.
2
Hide quick links:
Advertisement
Table of Contents
