Liebert UPSTATION GXT 2U User Manual page 13

Optional Rack Slide Installation
1. Remove the decora-
tive Top / Side Cover
by sliding it forward to
disengage inner tabs
and lifting it upward.
To change orientation
of the Display, remove
the Front Plastic Bezel
Cover by pulling it for-
ward. Remove the
tower Display Tem-
plate by lifting it to
reveal the rack-mount
Display Template.
Replace the Front
Plastic Bezel Cover.
2. Locate (2) Rack Mount
Handles and (8) M4 Truss Head Screws in the accessories box
packed with the UPS. Fasten the Rack Mount handles to the sides of
the UPS using (4) Screws for each Flange.
NOTE: For rack-mount installation, the UPS must be supported by a
shelf or slide rails. The Securing Flanges WILL NOT support the
weight of the UPS.
CAUTION:
ENCLOSURE BY PLACING THE UPS IN THE LOWEST POSSIBLE
RACK POSITION.
REDUCE THE RISK OF TIPPING THE RACK
11