Configuration Program - Liebert UPSTATION GXT 2U User Manual

CONFIGURATION PROGRAM

This is a new feature included with the new UPStation GXT 2U line of
UPS. Several UPS settings that were previously not available, or required
custom manufacturing, may now be modified using this program. For
most users, the factory default settings will be adequate. This manual will
illustrate the features available for modification, as well as the factory
default setting.
GTX2 Configuration Program Abilities
• Select one of five output voltages to match voltages found around the
world.
• Enable/Disable Auto-Restart.
• Select frequency converter operation with a fixed output frequency of
50 or 60 Hz.
• Set the Low Battery Warning alarm time from 2 to 30 minutes.
• Enable/Disable the Auto-Battery test.
• Set the Auto-Battery test to 7, 14, 21, or 28 days.
• Select the number of external battery cabinets connected to the UPS
to adjust the remaining runtime calculations reported by the Liebert
software products.
NOTE: This program is compatible with UPS models beginning with
"GXT2-", as in "GXT2-1500RT230". It is not compatible with earlier ver-
sions of UPStation GXT UPS.
What You Will Need
In addition to the GXT 2U UPS, you will need the configuration program
diskette and serial cable (Beige or Tan, 3-wire: GND, TX, RX; straight
through 2-2, 3-3, 5-5) included in the UPS accessory box. The BLACK
ML9P9S CONTACT CLOSURE communication cable IS NOT compatible
with the configuration program. A Windows 95®, 98®, or NT® computer
is also required to run the configuration program.
25