Product Overview - Martin Stagebar 2 RGBAW User Manual

Product overview

Stagebar 2 L
Stagebar 54 L Stagebar 54 L
Stagebar 2 S
Stagebar 54 S Stagebar 54 S
A
A
A - End cap release screws
B - Cooling fan
C - Data output connector (5-pin female XLR)
Use to relay DMX control data to the next
fixture.
D - Safety attachment eye
Use only this attachment point for secondary
attachment (e.g. safety cable).
E - Power throughput outlet (PowerCon light
grey)
Connect a power cable via a light-grey
Neutrik PowerCon connector to lead power to
the next fixture. The total current draw of all
the devices connected to the power
throughput outlet of the first fixture in the
chain must not exceed 15 amps peak, 11
amps constant.
6
E
D
B
C
F - Quarter-turn mounting points
Use to attach an omega bracket or
floorstand/mounting bracket accessory.
G - Control panel/display
H - Data input connector (5-pin male XLR)
Connect to DMX control data from the
controller or previous fixture.
I - Power inlet (PowerCon blue)
Connect a power cable with a blue Neutrik
PowerCon connector from a 100-240 VAC
nominal 50/60 Hz power source.
J - Primary fuseholder
Replace fuse with one of same type and
rating only.
Figure 1: Connections panel
Stagebar 2 user manual
J
I
F
H
F
G