Table of Contents
Advertisement
Introduction
Thank you for selecting the Stagebar 2™, a modular LED-based color changer and pixel display fixture from
Martin™. This product features:
• Cree XP-E high-power LEDs
• 150 watts total LED output per fixture at 25° C (77° F)
• RGBAW (red, green, blue, amber, white), and RGB color mixing, HSIC (hue, saturation, intensity, color
temperature) and HSI color management
• 54 LEDs arranged into 6 pixels per fixture
• Individual (6 x 1) or grouped (1 x 6, 2 x 3 or 3 x 2) pixel control
• DMX 512A control
• Control data in/out via 5-pin XLR connectors
• Control panel and full text backlit LCD display with battery power for offline setting and addressing
• Auto-sensing power supply unit with 100 - 240 V, 50/60 Hz operating range
• Daisy-chainable power link
• Power in/out via Neutrik PowerCon locking connectors
• Quarter-turn fastener mounting points
• Narrow diffuser front supplied
• Short (Stagebar 2 S) and long (Stagebar 2 L) models. To simplify the combination of different models in
installations, three short models have the same length as two long models.
The Martin Stagebar 2 is based on the successful Stagebar 54 that was launched in 2007, but the Stagebar
2 has been extensively revised. Besides new, more powerful LEDs and newly designed lenses with a tighter
beam angle, the Stagebar 2 features 5-pin XLR instead of RJ-45 DMX data connectors.
For the latest firmware updates, documentation, and other information about this and all Martin
Professional™ products, please visit the Martin website at http://www.martin.com
Comments or suggestions regarding this user manual may be e-mailed to service@martin.dk or posted to
Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.
This device complies with Part 15, Class A of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
Matériel Brouilleur du Canada.
Unpacking
The following items are included with the Stagebar 2:
• Neutrik PowerCon power input connector
• Opal front cover
• Narrow-angle diffuser filter
• Omega rigging clamp attachment bracket with quarter-turn fasteners
• This user manual
Using for the first time
Before applying power to the fixture:
• Read the "Safety Information" section that starts on page 3.
• Check that the local AC power voltage is within the ranges listed on the serial number label and in "AC
power" on page 9.
• Install the supplied Neutrik PowerCon power input cable connector on a suitable power cable as
described in "Connecting to power" on page 9.
Introduction
7
Advertisement
Table of Contents
